Multiple Choice Questions

i failed tshoot exam today. Dont know where it go wrong but as per me i had all the answer correct. please any one can provide suggestion for reverification the result.

Sorry for that. Questions and ticket were the same than here.??

questions are valid

I passed 980/1000 (24 Q = questions)
All Tickets are valid. (10 Q)
MCQ is valid 13th Nov.2019 (12 Q)
HSRP Sim (1 Q)
BGP sim (1 Q)
Tnx net-tut and Good luck

how many question you got in HSRP sim. I got 4 question with sh,ping command. configuration was not allowed. Let me know because i failed exam today.
layer 2, i got 56 percent answer correct.
Acess vlan , trunk vlan , dhcp helper , vlan acess map this were the tickets i got.

Hi guys, I am not sure but I think that this question is wrong :
Question 7
Which sequence allows the communication from router to another router via ssh.
A. 60 permit tcp host xxxx host yyyy eq 22
B. 50 permit tcp host xxxx host yyyy eq 21
C. ?
D. ?
Answer is A, yes because 22 is SSH.
But this is a standard access list and we cannot configure host to host but only a host allow/permit

R1(config)#access-list 60 permit host 1.1.1.1 host 2.2.2.2 eq 22
Translating “host”
^
% Invalid input detected at ‘^’ marker.

while on standard only this works :
R1(config)#access-list 60 permit host 1.1.1.1 ?
log Log matches against this entry

Thanks for your time guys

@ cisc0m….

the “60” is the seq-id of the accesslist entry not the access list number itself.

router#sh ip acces
Standard IP access list 90
10 permit 10.10.10.10
Extended IP access list QOS-IP-SLA-PING
10 permit icmp 1.2.3.0 0.0.0.255 host 10.10.10.10 echo

Hi Guys,

Is it worth registering to the premium account? or does the recent PDF have the questions and sims?

I gave and passed yesterday with 1000/1000.
All mcq from nov13 update.
The two simlets and all tickets are still valid.

@IS, did u use premium or just the NOV PDF?

@IS, You got 10 trouble tickets and HSRP and BGP simulator. Let us know what you got for HSRP simulator ,configuration or just troubleshooting. your response will be appreciated

can anyone pls share the the tickets on my email hussainam84 at gmail dot com

Hi.

I passed the exam today 1000/1000
All mcq from nov13
The two simlets and all tickets are still valid.

Thanks @networktut

Hi ,

I passed the exam yesterday 942/1000.
MCQ and tickets are still valid. It is important to fully understand how GRE works and reasons why interface tunnel is in up/down state.

Good luck !!

Passed today – mcq valid, HSRP, BGP, and tickets as well. Thanks network tut!!

Hi,

Where can I find the MCQ nov 13 pdf?

cisc0m
its not a standard ACL. the name of the ACL is: ipv6 access-list PERMIT_SSH
the numbers 20, 30, 40, 50, 60 refer to ACEs or access control entries; lines in the ACL. It’s an extended ACL.

standard ACLs do not exist in IPv6

Hi,

Where can I find the MCQ nov 13 pdf?

Has anyone any experience getting questions which are older than January last year?

Passed 1000/1000 today.

All tickets, sims and MCQs 100% valid, thanks all.

From nov19 MCQ
Question 10

Two switches asking why DTP isn’t working one switch GigabitEthernet, other FastEthernet?
A. Because of a speed issue

B. Different VTP domains
C. SWA has a FastEthernet port

D. Because of dynamic desirable mode

Answer B

Is this a typo in the question statement? DTP must be VTP? Someone please explain :) cheers

@ FOX M

yes it should be a typo, since DTP has not Domains!!

Today, I passed my T-SHOOT test (24 questions). All MCQs (12), HSRP & BGP SIMs (2), and Tickets (10) are still valid.

@@@D&D
1) Follwing the buttom-up TShoot methods, please order from step 1 to step 4 how to solve an issue with an IP phone:

1. Check PoE

2. Check VLAN

3. Change DHCP GW with option 150

4. Check image file from TFTP server

2) GRE tunnel missing configuration between R1 and R2
R1
source 10.1.1.1
destination 10.1.2.1

R2
source 10.1.2.1
destination 10.1.1.1

@@@MCQs
:
Q1: B. ipv6 traffic-filter Internet (in/out)

Q2: A. sh ip interface (choice two)

D. sh ip traffic

Q3: A. Asymmetric
Q4: E. 60 (permit tcp host 2002:2000:2:2:2::2 host 2000:ABC:20:2:2::2 eq 22)

Q5: A. Apply exec-timeout 0 0 in line console 0

Q6: A. EXSTART (ospf question)

Q7: B. spanning-tree cost 5 on interface Gi0/2

Q8: B. Different VTP domains (sw1: cisco123 and sw2:cisco456)

Q9: A. Recursive routing

Q10: A: Change the source ip which is wrong on R2


Passed today 923/1000
All tickets, sims and MCQs from 13Nth Nov 100% valid.
Thanks all

Cisco will change new Cisco Certifications in Feb 2020, last chance to get latest dump and take exam ASAP.
@Contact me to get share (VCE, PDF, PKT) with VCE tool player and all lab sim on EVE (.unl), Packet Tracer: saaau_holo(at)yaaahoo.com (replace aaa=a)

Dynamic Trunking Protocol (DTP) sends the VTP domain name in a DTP packet. Therefore, if you have two ends of a link that belong to different VTP domains, the trunk does not come up if you use DTP. In this special case, you must configure the trunk mode as on or nonegotiate, on both sides, in order to allow the trunk to come up without DTP negotiation agreement.

From cisco learning network found via google

Therefore IMHO the question and answer are correct.

I have tested this in GNS3 and VTP is the correct answer. DTP is not able to create trunk when VTP domain is mismatched. Here is the console message:

*Jan 30 10:26:38.988: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Gi0/0 because of VTP domain mismatch.

Passed. All MCQ’s, Simlets, tickets are valid (November MCQ). On ASW cmd “show int status” not working.

Hi Everyone.

Do they recycle the old MCQs or most of the multiple choice questions comes from the NOV 19th? thanks

hi,

passed today, MCQ from November, all Ticket valid. i had also ticket 2 at the test. 12 MSQ, HSRP& BGP SIMLET and 10 Tickets….

best invested 22$ :)

wish you the very best of luck!