The TSHOOT 642-832 exam has been used to replace the old ISCW & ONT exams so this article is devoted for candidates who took this exam sharing their experience. Please tell with us what are your materials, the way you learned, your feeling and experience after taking the TSHOOT exam…
Your posts are warmly welcome!
Some information I have gathered so far:
The exam is very different with other Cisco exams. You have 3 hours for this exam.
Exam’s Structure:
+ About 3 Multichoice questions
+ 2 Drag and Drop Questions
+ 13 lab-sim Questions with the same network topology (13 troubleshooting tickets or you can call it one “big” question). Each lab-sim is called a ticket and you can solve them in any order you like.
Topics of the lab-sims:
1- IPv6
2- OSPF
3- OSPFv3
4- Frame Relay
5- GRE
6- EtherChannel
7- RIPng
8- EIGRP
9- Redistribution
10- NTP
11- NAT
12- BGP
13- HSRP
14- STP
15- DHCP
The problems are rather simple. For example wrong IP assignment, disable or enable a command, authentication…
In each tickets you will have to answers three types of questions:
+ Which device causes problem
+ Which technology is used
+ How to fix it
When you press Done to finish each case, you can’t go back.
A demo of the TSHOOT Exam can be found at: http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
Note: We have gathered many questions about TSHOOT exam and posted them at TSHOOT FAQs & Tips, surely you will find useful information about the TSHOOT exam there!
In short, unlike other Cisco exams, we can go backward in this exam. That means we can choose a Troubleshooting Ticket, browse all the configurations and hit “Abort” to ignore that Ticket. We can come back to that Ticket any time.
Below are the topologies of the real TSHOOT exam, you are allowed to study these topologies before taking the exam. It surely saves you some invaluable time when sitting in the exam room (Thanks rrg for sharing this).
IPv4 Layer 3 Topology
IPv6 Layer 3 Topology
Layer 2-3 Topology
Luckily we have a link to download this lab (open it with Packet Tracer v.5.3+) (Thanks Ali and many people for sharing this)
http://www.networktut.com/download/TSHOOT_LAB.zip
Below is the screenshot of this file
A newer version of the TSHOOT exam has been added on Nov-20-2011 (Thanks zero point zero for sharing this)
http://www.networktut.com/download/TSHOOT_Exam.zip
If you have any new information about this exam, please share with us!
Below is the strategy that has been used by many candidates to pass TSHOOT. Thanks to ENA for posting this.
|
I just come from MY exam and i passed T-shoot 1000/1000
i want share some experience there i had Only one BUG IN exam For question access map
U need to choice Aswn1 to get correct Answer
because if u make Dwsn1 U will see not there Option to get correct answer..
Well
all those TT are the same all
The TT’s that I got are mentioned below:
1. ASW1 – Allowed Vlan
2. ASW1 – Port Security
3. ASW1 – Access Vlan
4. DSW1 – Access Map
5. DSW1 – HSRP
6. R4 – IP DHCP – first delete ip dhcp excluded-address 10.2.1.1 10.2.1.253 and then enter ip dhcp excluded-address 10.2.1.1 – 10.2.1.2
9. R2 – IPv6
10. R1 – NAT ACL
11. R1 – L3 Security – ACL
12. R1 – BGP – Wrong BGP Neighbor Address
13. R1 – OSPF Authentication
I didn’t get there any IP Helper there also i checked all TT and IP helper was not configured there..
Well now I want to Describe how to find more easy the TT
first with 3 TT which be ON R1..
IN 3 TT U can Ping 10.1.1.1 which tickets are Nat , BGP , Access list , remember IN 3 TT U can ping 10.1.1.1 which is R1
totally are 4 TT on R1 which IN one Ticket u cannot ping 10.1.1.1 but u can ping 10.1.1.2
which Ticket is Ospf authentication….
Dont lose ur time use abort abort abort and abort First I found those 3 TT where I can ping 10.1.1.1 and one ticket when u cannot ping 10.1.1.1 but u can ping 10.1.1.2 which is
ospf authenteticaton…
4 TT Gone of R4
now Find 2 TT HSRP and IPV6 which are so clearly as question….. Now totally 6 TT GOneeeee
Next steeep
FIND 4 TT which Client 1 Get IP address 169.x.x
which are Access vlan 10 , port security issused on f0/1/0 , Trunking Interface Those 3 TT u Must must must Check ON ASW1 Remember…
One TT is ON R4 Layer 3 Topology which Client get IP 169.x.x.x
which Is DHCP ON R4 router R4 – IP DHCP – first delete ip dhcp excluded-address 10.2.1.1 10.2.1.253 and then enter ip dhcp excluded-address 10.2.1.1 – 10.2.1.2
Now 10 TT Goneeeeeeeeeee
now Find TT which Client get IP address 10.x.x.x but cannot ping the Gateway
Using abort
that Is Access Map but in this TT is one BUG and U need to choice ASW1 to get Correct answer because doesn’t see any option Vlan acl / Port ACL *
IF u select AWS1 U will see this One Vlan Acl POrt
now 11 TT GONeeee
now 2 TT Of R4 which Client get IP address 10..x.x.x
Route Redistribute , and Passive Interfaceee ,,
I played with those 2 TT for more 20 MIN just to play and to spend the time because i did exaaamm so fast 30 MIN
and i stayed for 1 Hour
well now are ONLY 2 TT
When select One TT of them
IN one U will see wrong redistribute I mean name of spelling of Route map…
if U use abort and JUMP another TT U will see then Correctly Route map spelling name and u will see another one new with Passive Interface Under EIGRP
Well the First I end this one with wrong spelling route map..
and for this one the last with passive interface i did in the end
and u must select
R4
EIGRP
no passive interface under eigrp process in Interface f0/1 and f0/0
now 13 TT GOneeeee 100%
Well also i want tell YOU something is better to Useeee 46Q there are all all all all all the answers the same when U select just there in that DUMP
are 2 questions WRONG
Interface Trunking allow vlan 10 , correct answer is 10.200
now as that dump 10.20.200 keep this In Mind..
and another one Port security In this dump 46Q are Wrong
for this one port security need to choice with shutdown and no shutdown there on dump write somthing different right
I hope this have been Information for all OF you
Here is the strategy which I Useddddddd
Problem Device Problem Description
A – > ASW1 –> Access VLAN 10 ( Layer 2 )host 1- 169.x.x.x
P – > ASW1 –> Port-Channel not allowing VLAN 10 ( layer 2 )host 1- 169.x.x.x
S – > ASW1 –> Port Security needs to be disabled ( layer 2 )host 1- 169.x.x.x
H – > DSW1 –> HSRP Track 10 ( layer 3 ) host 10.x.x.x
V – > DSW1 –> VLAN Filter ( layer 2 ) host 1 -10.x.x.x
E – > R4 –> DHCP wrong exclude address host 1- 169.x.x.x
P – > R4 -> Passive Interface Under eigrp 10 host 1 – 10.x.x.x
R – > R4 –> Route Redistribution ( layer 3 )host 1- 10.x.x.x
6 – > R2 –> IPv6 OSPF ( Ipv6 topology ) ipv6 ip add
B – > R1 –> BGP wrong Neighbor IP ( layer 3 )host 1 – 10.x.x.x
N – > R1 –> NAT ACL miss configured ( layer 3 ) host 1- 10.x.x.x
A – > R1 –> ACL blocking traffic on int ( layer 3 )host 1- 10.x.x.x
O – > R1 –> OSPF Authentication issue ( layer 3 ) host 1 – 10.x.x.x
Try the following strategy.. if you have got time… This i have found from one of the post…. your strategy is good, but how will you find out which ticket is having that particular issues… this may help you…
If you can ping 10.1.1.1 Then faulty device is definitely R1. Check this website. This is 100% correct. From client ping 10.1.1.1. If successful then R1 is the faulty device. It is simple concept. Any device before that does not have faulty configuration. Because you can reach R1 it means DSW1, R4, R3, R2 is allowing you to reach R1. If any of them had wrong configuration then you would not be able to ping 10.1.1.1. From client I pinged 10.1.1.1 more frequently then others. Once you can ping 10.1.1.1 then you definitely know the fault is with R1. No doubt about about that.
1. Can be faulty BGP neighbour. Wrong ip address of neighbour. Use show run. You know where to look. Under router bgp 65001.–> sh ip bgp sum
2. Check NAT access list. Look for permit statement. If permit 10.2.0.0 0.0.255.255 is not present then it is NAT Access list.
3. Check edge_security access list. If the permit statement is missing for — permit 209.65.200.224 0.0.0.3 then it is IPV4 layer 3 security.
So, you can see that if you can ping 10.1.1.1 but can not ping 209.65.200.241 then 3 TT for R1.
Now if you can ping to 10.1.1.2 but can not ping 10.1.1.1 then it is definitely R1. ip ospf authentication message-digest on serial0/0/0/0.12 interface. Check configuration on R1. You will see that — ip ospf authentication message-digest is missing. So it R1, OSPF, ip ospf authentication message digest.
In total R1 has 4 TT.
3 TT — You can ping R1 but can not ping 209.65.200.241
1 TT – You can ping 10.1.1.2 but can not ping 10.1.1.1.
As soon as I opened a TT –> I used ipconfig to see the ip address. If it is 169.XXX then 3 TT for ASW1. If it has valid ip address such as 10.2.1.3 then i immediately pined 10.1.1.1 to see if the fault is with R1. 3 TT gone.
Total 6 TT gone in the blink of an eye.
ASW1 – 3 TT – if ip address is 169.xxxx
(1.switch port security: Symptoms for this ticket:-
1- Client 1 is getting 169.x.x.x ip address
2- Client 1 is unable to ping Client 2 as well as DSW1.
3- ‘sh interfaces fa1/0/1′ will show following message in the first line
‘enFastEthernet1/0/1 is down, line protocol is down (err-disabled)’
4- ‘sh running-config’, you will see ‘switchport port-security mac-address ’0000.0000.0001′ configured under fa1/0/1.
if u did not have the port in err-disable mode but in the config there was a port security mac 0.0.0.0….. command assigned
so if u do show int fa 1/0/1 it will show it as UP so do not get confused)
(2.vlan1–> vlan10)
(3.trunk allowed: int range portchannel13,portchannel23
switchport trunk allowed vlan none
switchport trunl allowed vlan 10,200)
R1 – 3TT – if you can ping R1 10.1.1.1
R1 – 1TT if you can ping 10.1.1.2 but can not ping 10.1.1.1
If HSRP mentioned then you know it is DSW1
If ipv6 or ospfV3 mentioned then you know it is R2.
9 TT very simple.
Now if you can not ping 10.1.1.1 or 10.1.1.2 then you come back near client. Like DSW1, R4.
DSW1 – 1 more TT — Vlan ACL – Look for VLAN Access Map
R4 – 3 TT: EIGRP Passive interface , DHCP on R4 which get IP add 169.x.x , OSPF-to-EIGRP (OSPF->EIGRP).
also now we have 2 TT new to idendify them if client now get ip add 169.x.x also check ON R4 for DHCP
this new One again ON R4 for passive Interface
now totally we have 3 TT ON R4
4 TT on R1
Dws1 2 TT
R2 1 TT
Asw1 3 TT
|
* Note: The bug has been fixed recently so you can select DSW1 device, next page you have to scroll down and you will find the VLAN Access List/PACL option.
Best wishes to those who are going to take this exam!
Mine.
DND
EEM ‐‐‐‐‐‐‐‐‐‐‐‐‐‐ CLI based for Management and Monitoring
SDM ‐‐‐‐‐‐‐‐‐‐‐‐‐‐ provide a GUI for Administration
FTP ‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Used for Backup and restore
MCQ
The following commands are issued on a Cisco router:
Router(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(config)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router#debug ip packet 199
What would be the output shown on the console?
A – All IP packets passing through the router
B – Only IP packets with the source address of 10.1.1.1
C – All IP packets from 10.1.1.1 to 172.16.1.1
D – All IP packets between 10.1.1.1 to 172.16.1.1
Ans D
%LINK-3-UPDOWN : Interface Serial 0/0 change state to up
%LINEPROTO-5-UPDOWN :Line protocol on interface serial0/0 changed state to up.
Refer to the graphic . Which statement is correct regarding the output shown in the graphic.
1) These two log messages will not have a severity level. They are not errors but just informational messages.
2)The first log message is categorized as a warning message.
3)These messages regarding interface status are normaloutput and will always be displayedwhen you exit config mode.
4)The first log message is an error message with a severity level of 3
5)The second message would be shown if the logging console warning command has been issued
Ans 4
link to the labs in GNS3
http://dl.dropbox.com/u/2749921/GNS_Tshoot.tar.gz
can post voucher for this exam please
Please someone tell me. Do you choose a topology of your choice to work on or…………
you might wanna check this site…..
http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
Actualtest CCNP TShooting 642-832 Dec 25,2011 57Q
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
Actualtest CCNP Route 642-902 Dec 22,2011 322Q
http://filepost.com/files/c5dfee7m/Actualtest_CCNP_Route_642-902_Update_Dec_22,2011_322Q.pdf/
Actualtest CCNP Switch 642-813 Dec 01,2011 502Q
http://filepost.com/files/mbcc72d6/Actualtest_CCNP_Switch_642-813_Update_Dec_01,2011_502Q.pdf/
pass the exam with 1000 and i CCNP now .
Study the CBT Nuggets for T-shoot (to reminde the technology)
follow Vova’s Startegy this is all that you need.
don’t learn it by heart try to understand it.
always those steps :
1.ipconfig on Client1
if address is 169.X.X.X ===> 4 TT in ASW1 (see Vova )
ifnot
ping to 10.1.1.1 ==> Success 3 TT in R1 (see Vova )
Failure ping to 10.1.1.2 ==> Success 1 TT in R1 (see Vova)
==> Failure
||
w
3 TT in R4 1TT in DSW1
IPv6 and HSRP are easily recognisable.
Thank youuuuuuuuuuuuuuuuuu God , Vova and Network Tut .
Good luck to the NP guys.
Answer to Brown — both layer 2 and layer 3 topology is visible/accessible for all TT. Hope this is helpful.
Okay, could you please tell the purpose of Vlan 200 which is configured on all 4 switches?
Thanks.
Most Probably, Vlan 200 could just be a Mgmt. Vlan for all switches?????
I think we may ignore the vlan 200. Pls be aware that there are lots of configuration just to make us confused. They want a true error, others just ignore it. Just concentrate on the exam strategy.
hello guys does anybody want to share MCQ and dnd?
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
Please somebody tell me. Do we need to apply the solution after identifying the problem in a TT?
Thanks Badisoda. It helps greatly. So what you mean is that i can work with any topology of my choice.
dude, everything is well explained by Kevin here:
ht tp://w ww. youtube.com/watch?v=3Bo4Pw82G2M
ht tp://w ww. youtube.com/watch?v=ZIRxfxeTSLI&feature=fvwrel
ht tp://w ww. youtube.com/watch?v=BocjkJ1l71k&feature=related
thanks for sharing the link
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
VLAN 200 is pure for mgmt between switches, and must be allowed between trunk links, so for question on switch to switch connectivity make sure we allow vlan 10 and 200 on etherchannel 13 and 23. Hope this helps.
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/ <——————– upon looking at the TTS, i can see that there are wrong answers.
Hi Guys, question here. Will the config change every ticket? or is it the same configs for all the tickets? TIA
hi unknown.ph it differs bro with every ticket. pinoy ka?
hi plz ……….I am going to attend xm on nxt week
can we answer(finish) the tickets in any order ? or need to finish top to bottom ?
If disorder tht will affect the other tickets ?
Hello test takers.. i see poeple say use vova way.. i have one question. there are 4 questions with 169.x.x. ip address.. do you know which one is port security or VLAN10 or the other two.. please explain.
thks
did anyone here use GNS3 to practice for this exam? which configure sims did you use and where can i find it?
Thanks
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
Good Luck
Passed exam with 1000/1000, my 2cent is, never rush through though you know the answer, verify for your concept with show, ping, traceroute commands, if unsure of anything abort the ticket and compare config with another tkt. Follow strategy provided by Vevo on page 53 of this discussion. It really helped me. Good luck everyone.
is this the length of the exam? 155(minutes)
@Antonio 2 hours 15 minutes i the duration of the Exam…
Hello Badisoda, what did you have as DnD and MCQs? Also, did you need to apply the solutions for the TTs?
Thanx, wrote 1000/1000 today I will say that it is hard to fail if you use this site. I used the short version. If you are not sure about a command use abort and go to another question and look for the command or how it should be configured then you abort again and go back.
guys, did you get email from Cisco after completing CCNP TSHOOT for cisco id? How many days will cisco id arrives?
http://filepost.com/files/e8f9145c/Boson_v7_CRACKED.zip/
Good Luck
Passed but with an 8xx/1000.
I didn’t use the strategies, rather just recalled the topics.
Funny enough if you watched Kevin Wallace’s topics, he mentioned some of the tickets on here.
Abort is probably your best friend, because most of the exam, I just compared configs. The problem is that every time you abort a ticket and open the same device, it wipes out the buffer from the previous ticket. It’s probably best to just make sure you know which config looks strange and compare it on another ticket.
i agree…. ive learned very useful technique after i watched kevin wallace tshoot youtube :)
Abort was very useful on my part to get a perfect score…. was laughing so hard when I saw my score :)
Cleared the exam 986!! Networktut is more than enough for this exam. Thank you Networktut.com….
watch any movie for free online
8809
noropook8 55
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
Good Luck
this got wrong ticket answers:
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
I’ve perfectly got every things… all suggestions, all strategies… and all makes sense!!!
But because I am very stupid I didn’t understand why we cannot just remember just the association:
QUESTION = FAULTY DEVICE = ISSUE
I mean like for the others exam, simply associate the question with the correct answer!?!?!
Plzzz help me!!!
How questions are appear in the exam i mean a single question has all the tickets or every ticket has a single question help me i’m going to write my exam on saturday…
please i need a T.SHoot CBT nuggets video link
please i need it urgently, any one have this link please share it to us please
thanks and hope success for every one here
@STUPID GUY – Simply associate the question with the answer doesn’t work in real life. So yes, stupid is what stupid does.
@Yogesh – I suggest you better start crackelacking… study is hard work. Plzz help me? Really!? Why?
@mohamed – You need TSHOOT CBT urgently… go buy it.
@VPNs-Bingo – And thanks in-disguise .com and vpnincome .com to remind us to never use your services. SPAMMERS!
@RonJay: Yes, I am noypi :)
ALHAMDULILLAH :)
ALHAMDULILLAH :) just passed my TSHOOT exam …. Thank you all here on networktut. you all have been so much helpfull. And offcourse hats off to “networktut” you are fantabelous :) moreover folks all tickets on networktut are valis … a few things NEW seen in the exam …. ALL the best for the people who are going to take exam soon :)
ALI, Please what did you have new in the exams?
Dears who taken the xm……………
Plz post what r the new things in the xm
failed the exam yesterday with 780 points (just needed 10 more to pass, what a shame), i got 1DD and 3 MCQ (all of them are on this site) and 13 TTs which some of them were NEW (i agree with Ali).
the exam looked more complex than i thought and i actually ran out of time so i could only answer 12TTs. I’m pretty sure that at least there were about 7-8 tickets from this site but some of them were totally different as the configs for R1, R4 and DSW1 were different.
i think cisco is changing some of the questions as loads of people have been getting the perfect score.
Can someone confirm if TTs has changed? I just passed tshoot 3days ago with 1000/1000 and obviously all came from this site. I had 4mcq, no dnd and 13 tts. Thanks networktut!!!
:-) …..finally…CCNP with 986
Got 4 MCQ and no D&D. 13 TT all from networktut. It was really diff kind of exam. U need to understand the concept & technologies how L2, L3, Port security, L3 protocols etc works, thn apply the strategy to save your time.
There ll be lot of extra config in all the devices which create confusion some time. Good luck to all others !!! & Thx a lot networktut !!!
over to CCIE ………a real fight starts nw ………..###@@@ KO…
were can i find CBT nuggets for CCNPv6 TSHOOT 642-832 by Jeremy
Hi guys , were can i find CBT nuggets for CCNPv6 TSHOOT 642-832 by Jeremy
ithemix4@gmail.com.
Scheduled my TT exam on next Feb 6th. already preprared reading Cisco Press, CBTN, network tut
Hi everyone,
Does anyone know where I can get the CBT Nuggets for T-shoot?
Thanks.
I hve cbt for tshoot drop me a mail at ciscolikesme@gmail.com
do guys think Cisco know about this site?
i have finished my 3 ccnp already but i havent received email from Cisco yet =<
guys how long did you receive email from them?
For me it took 23 hrs
I failed today with 780. Some TT tickets were different than here.
@ .
are you sure cause am going through my exam 2ommorrow
is it true that TTS has been changed???????????
Did the exams really change? I’ll be taking it next week…can someone please confirm? thanks
TSHOOT lab practice:
http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
TTS ARE SAME. 3MCQS
Hi,
I appeared for TSHOOT today and unfortuynately failed. I got only 766. MCQ and DD are same but some new questions. I really ran out of time.
So be prepared and go or just wait for some more time.
Friens one more…my Copmosite is expiring tomorrow. (I wrote composite on 2009 Jan 21), so do I need to start from the CCNA itself…? I was not working in the past years and forget about this. Pls reply……..Thanks
@brown how did u know zat its za same?!!
@sd ktm you can sechdult another tset for your tshoot after 2 weeks
did you follow za startegy you may got confused or something ?!!
@sd ktm: why and how did you fail? new tickets?
@sd ktm you can sechdule another test for your tshoot after 2 weeks
did you follow za short version startegy or ENA startegy?!!!you may got confused or something
but not about a new tickets
Does the tracert command work on the PC’s in the exam?
Does traceroute work on switches and routers in the exam?
It does in the demo by cisco, but have heard that in the exam it does not?
passed yesterday with 835 marks.
It was tough. I ran out of time. :)
a few tips:
1. Use abort strategy extensively.
2. in exam, I wrote down all the TT’s titles listed on this site on plastic sheet. Then I just crossed out as i solved each TT. Not all of them were from here.
3. Traceroute does NOT exist in exam.
Good luck
How many tickets were on the exam but not from here?
The Company In-Disguise .Com
Glad to introduce you – private and Fully Automatic VPN Service!
In-Disguise. Com – Fully Automatic VPN service, you don’t have to waste time on:
1 – Search Supports if disconnected from a server, search for a standard installation “OpenVPN client”
spend time for installing downloaded configs to the program.
Troubleshoot the upgraded system for a stable connection to the VPN.
access to all servers for just 9 EURO.
DoubleVPN, OPENVPN and PPTP VPN – Access to 18 servers in 10 countries!
Subscribe to All Servers of Our Service for 9 Euro; 3 months = 20 Euro; 6 months = 35 Euro; 1 year = 55 Euro.
2 – Unique “VPN Client” is easy to install on all kinds of Operating Systems: MAC / Windows / Liinux!!!
Will allow you to switch easily between the VPN servers in USA / DE / UK / IT / NL / LU / EG / PA / RO / MY Continuing
In the near future our service will be available in Spain, Greece, Sweden, Mexico, Czech Republic, Poland, China, Belgium …
Types of VPN connections included in a single subscription – DoubleVPN and OpenVPN.
3 – The program features an easy configuration of a VPN connection to your Internet: -automatically Block Internet Connection when Disconnected from a VPN.
– Automatic connection to the VPN when you turn on the Internet.
4 – Company Takes All Kinds Of Payments in Full Auto Mode!
WebMoney / Visa / Master Card / PayPal / Liberty Reserve / BitCoin / SMS and many others.
Our site is here in-disguise .com /?aff=69
Sincerely, In-Disguise .Com
========
Also,our Service has a unique N-tier, Private Partnership Program:
You will get 35% of total payments of your customers!
Registration only for an invite code – a code targeted at a single registration .
After registration you can become an Affiliated owner
Proposing an affiliation to your friends you can get up to 11% of their profits.
Our sister site is vpnincome .Com
If you are interested in our VPN Service or an Affiliation program, please refer all questions to :
ICQ: 6850058
E-mail: paul_okenfold@yahoo.com
@Paul, are you sick man?
this exam is the easiest among 3 ccnp exams
some people mentioning about new tickets ? anyone knows abt it?
nope, there’s none……. still same…..
First time I was fail the exam, I pass the exam today (21-01-2012), the 13 ticket are same from network tut. If unsure of anything abort the ticket and compare config with another tkt. 100% on TTs but I must have missed a 3 multiple choice question or something. This site is more than enough. But you might want to give it a try. I am thankful to all of those with the useful comments ,renjith,Nidhin,renjansir&networktut. Once again Thanks networktut &all the best to all
I am going to take xm on next week
@RATHEESHNAIR
plz tel me …any new MCQ 0r DD
Took the exam yesterday, and the TT’s are still the same. There are some changes in de DD’s though. Topics are the same, but slightly different described. Know your facts and there’s no need to worry. Good luck with the exam and becoming CCNP!
ERROR in 642-832 !
hi,
i took the exam yesterday but failed with the 285 point! (points between 300-1000) When i clicked next and previous question in the same ticket, all the choises changed all the time!:s And from the second ticket, all the questions and answers were totally the same! I had to click the same choises in other 12 tickets :s
Did you experience anything like that ? I send a mail cisco support, waiting the answer… I learnt that some people lived this problem and cisco sent a new voucher to retake the exam.
I have some questions :
1) Do all the tickets have one problem or all problems in all the tickets? There is only one wrong config in each ticket, isn’t it?
2) Is there any recommendation about exam? Is it a problem that passing between next-previous questions frequenlty?
3) i read a recommendation says ‘close all config pages before passing the other ticket. If config pages stay open, it can be problem during the exam, questions and answers can merge’ Is there anything like that?
Pfffffff :(
Tshoot was my last exam in the ccnp and i had problem :(
Thanks
I’ve passed TSHOOT exam on Jan 14,2012. Prepared for exam by watching CBT nuggets, P4S and using GNS with the topolgies per trouble tickets except the vlan filter, port security. Somewhere on this site the GNS topolgies can be located with each trouble ticket fault. All TT’s are still valid on this site. Don’t be shy to use the abort feature if unsure I did it a bunch of times and passed with a 986. Good luck to all and remember try to understand the concepts and just don’t pass the exam just for the paper.
Hello everyone, Valentine’s Day soon. Look for your love today)))
@wolfman101
You need to watch the following youtube to figure out how to solve the ticket questions.
The youtube (cisco tshoot demo) shows how to solve the problem… Ticket seems to be all the same but they are not the same when you closely look at the configuration file. Hope this would help.
@wolfman
the youtube cisco demo solution
http://www.youtube.com/watch?v=AaAemLD-pvY
if you guys dont practice TSHOOT demo from Cisco site then you will fail
TSHOOT Demo
http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
among the 3 ccnp exams, TSHOOT is the easiest!!!!!!!!!!!!!
@Gomura
Thank you for your opinion. But i had watched the videos and did cisco tshoot demo so many times. In the exam, Choises totally changed when i pressed only next question and than back question, WITHOUT changing my choises… Just click next question, than previous question, hop, all the mchoises are different:s
@wolfman,
If you click wrong answer in the first in a ticket, answer choices in the second problem will be totally different and the third will be different as well in a ticket.
That is the beauty of tshoot questions and you have to find out which device are unable to ping the server.
The youtube that I gave you explains and shows how to solve the problem. That site is excellent for tshooting. After you watch the youtube, then go to the cisco demo and try to find the problem without any help.
Dear Friends,
Kindly give latest Tshoot (642-832) dumps for me. I am planing to write the exam on comming Jan 30, So kindly give the latest dumps for me.
rameshbabu.cmc@gmail.com
Thanks & Regards,
Ramesh Babu.A.
Hi ,
I am scheduled my exam date on 26th. If anybody have the new TSHOOT questions please send it to me.
Thanks in advance
Sumesh
sumeshpala@gmail.com
Hello everyone,
I plan to take the troubleshoot exam soon. Could you please, send to me the latest dumps and study materials at my address: myself_78@hotmail.fr
I thank you very much in advance :)
Have a good day
@Gomura
I’m trying to say that :
Open the demo site.
Click Ticket 1
Click any answer for fault condition location and Click Next Question
Click any answer for which technology and Click Next Question
Now, when i clicked Previous Question, all the choises were different. My clicked answers weren’t there!
I know that answers are changing when i choose a choise. But ıt wasnt that i experienced :s
Im waiting for Cisco reply.
Thank you very much for your attention
@Wolfman,
I do not understand your problem and I do not see any issues and problems with Cisco demo tickets. You may still fully do not understand this problem…. Did you watch the youtube that explains the Cisco demo?
yes i watched:) anyway, i will share when Cisco replies my case.
There is no issues with demo tickets, there was a problem in the exam. My CCIE trainer said that the issue i experienced had been lived many times.
Thank you again ;
@wolfman101,
Let me know of how Cisco responses to you.
what is mean bt abort solution???
wEKa
Pass 930 all from here no change ….
thanks all
wEKa
Passed today got 1000/1000
if u need any advice do wrt here
Hi Harris,
Kindly give the TSHOOT (642-832) latest dumps to me. I am waiting for your valuable reply.
rameshbabu.cmc@gmail.com
Thanks & Regards,
Ramesh Babu.A.
@Harris-Afridi
we need to exit from cmnd mode in each ticket…..ie #exit
plz inform ASAP
@Faaaz
no man no need just answer the Q
Regards,
wEKa
Hi Friends,
Kindly give the TSHOOT (642-832) latest dumps to me. I am waiting for your valuable reply.
rameshbabu.cmc@gmail.com
Thanks & Regards,
Ramesh Babu.A.
@harris
hi harris i wanna know if thier is a new tickets or not or anything new in the exam?!!!!!!
congrats for your CCNP
Passes Tshoot 2 weeks ago
u must understand the tickets well
there are some modifications in 4 – 5 tickets
the rest is the same
when you enter the exam just write all the tickets (14 ticket) on the erasable note they give to you to know which tickets you completed and which is still remaining
http://filepost.com/files/bbbe8mfb/Actualtest_CCNP_TShooting_642-832_Updare_Dec_25,2011_57Q.pdf/
@Faaz
no new tickets
@Faaz
only use Abort
dont write any thing on eraseable sheet
u will get confused
as soon as u finish 1st ticked then mention and write only for that ticket ,,that have done this ticket
example
if u finish or done with bgp
only mention thst ticked on the sheet
R1= bgp
any changes for tickets? before or after the tickets MCQ and DndD questions ?
In All tickets can we identify from client 1 ?
4 ticket address 169.X.X.x
3 ticket ping 10.1.1.1 from client 1
1 ticket ping 10.1.1.2 but not 10.1.1.1 from client 1
4 ticket can’t ping 10.1.1.1 from client
1 ticket HSRP
1 IPV6
please kindly verify this
Hi Friends, Please clarify my doubt about CCNP.
I completed BSCI @ Apirl 2009.
I completed BCMSN @ July 2010.
If i complete TSHOOT before Apirl 2012, How long am i CCNP??
Is CCNP Validity expands ??
Please help……
http://www.cisco.com/web/learning/le3/le2/le37/le10/ccnp_exam_combo_tool.html
guys, to those who completed CCNP? do you guys get email from Cisco that you are now CCNP that you have completed 3 exams from CCNP? How long?
any changes for tickets? before or after the tickets MCQ and DndD questions ?
In All tickets can we identify from client 1 ?
4 ticket address 169.X.X.x
3 ticket ping 10.1.1.1 from client 1
1 ticket ping 10.1.1.2 but not 10.1.1.1 from client 1
4 ticket can’t ping 10.1.1.1 from client
1 ticket HSRP
1 IPV6
please kindly verify those who all are pass the exam
-If it is 169.x.x.x there are 4-TTs
1.ASW1 – access vlan 10 (show-run and check ASW1 if 1/0/1 and 1/0/2 are in Vlan1, if they are… stop!)
2.ASW1 – port security (show-run ASW1 if 1/0/1 and 1/0/2 are in Vlan10, apply sh int for both)
3.ASW1 – switch-to-switch (show-run ASW1)
4.R4 – DHCP excluded (show-run R4)
——————————————————————-
if client got IP address then 2 options:
-First, if client1 can ping 10.1.1.1 not to server 209.65.200.241 (3TT) ALL IN R1
1.R1 – NAT (10.2.0.0) (show-run R1)(sh ip BGP summary)
2.R1 – BGP (56-65) (show-run R1)(sh ip BGP summary)
3.R1 – ACL (show-run R1)(sh ip BGP summary)
Client can’t ping 10.1.1.1 but it can ping to 10.1.1.2) then: (1TT)
4-R1 – OSPF authentication (show-run R1 + R2)
-Second, if client1 cannot ping 10.1.1.1 (4 TTs)
1. DSW1(ASW1) – vlan access map(vlan acl port) *** this one cannot ping even gateway (Check vlan-filter command, which contain vlan access-map, this contain access-list no., now check access-list no. It can drop the packet for PC conntected to ASW1.)
2. R4 – OSPF redistribution (show-run R4)(EIGRP->OSPF is created and EIGRP-TO-OSPF is used)
3. R4 – passive interface (show-run R4)(sh IP protocols )
4-It may different AS no. for EIGRP is used To verify – show IP protocols
Finally, there are 2 distinct TTs,
-HSRP on DSW1 i. Check DSW1 Use track 10 instead of track 1 (show run) and this is the only question you will see tracking.
-IPv6 on R2
On serial interface use area 0, not area 12 (show run)
pare, contact mo Cisco Support at
https://ciscocert.secure.force.com/english/MainPage
Hi Guys…. check out Amazing video tutorials at http://www.lobstrr.com
It’s very easy to understand and learn complex networking concepts. Don’t spend time on pdf.books.
Dear All
I hav passed CCNA today, preparing for CCNP now, Kindly tell me link for the Latest dumps
found this link
https://www.aiotestking.com/cisco/2011/09/what-will-the-debug-output-on-the-console-show/
Passed TSHOOT Exam with 940 with a lot of help from here. Thanks networktut!
@Umair i have TSHOOT valid dumps… email me at ciscolikesme@gmail.com
passed tshoot last week 940.
All of the exam is here, but i advise you to know the concept.
Used:
CBT nuggets –> downloaded via torrent
useful videos –>
ht tp://w ww. youtube.com/watch?v=3Bo4Pw82G2M
ht tp://w ww. youtube.com/watch?v=ZIRxfxeTSLI&feature=fvwrel
ht tp://w ww. youtube.com/watch?v=BocjkJ1l71k&feature=related
videos above helped me about the usefulness of abort and checking other configuration on other ticket helps alot.
vce –> http://www.examcollection.com/cisco/Cisco.CertifyMe.642-832.v2011-10-05.by.kanchus.56q.vce.file.html
+ Experience
I did not use the short and long method, though i read them for preference but did not fully memorized them.
used ping alot, to save time i ping from up to the ground as we are only given 3 hours.
Hi Anonymous,
Kindly give the TSHOOT (642-832) latest dumps to me. I am waiting for your valuable reply.
rameshbabu.cmc@gmail.com
Thanks & Regards,
Ramesh Babu.A.
Hi EFG,
Kindly give the TSHOOT (642-832) latest dumps to me. I am waiting for your valuable reply.
rameshbabu.cmc@gmail.com
Thanks & Regards,
Ramesh Babu.A.
hi ramesh,
you can just read questions on the right side of the website. Thats all you need.
@RonJay: are you done with tshoot exam? I’ll be taking it this friday…
I passed TSHOOT on 23rd ….got 945(where the mistake I don know)
3 MCQ & 13 TT …
all r valid in this site…
I followed the short version strategy & listed on writing pad
TTs one by one checked , got fault device , aborted & marked on the list
3 confused TTs kept pending to check in last
finally start to answer
If any confused one u have , keep to last & compare those config
I am very thankfull to networktut & all guys who r posted
passed today with 1000 points! 2 MCQ and 1 DD all from this site.
The 13 TTs were also from this site (no EIGRP AS ticket)
watched the cbt nuggets video, practiced with cisco packet tracer and this website.
the exam is not easy, what makes it easy it’s the big help we get from this site, otherwise it’d be hard as there are 13TTs and only 135 minutes to solve them all.
Good luck!
@unknown.ph
yup last week.
hello, how can I create a forum?
Passed this week )))) All are the same. It’s easy 2 pass if u know topology well. If you understand each ticket and follow the strategy exam is quite easy. Thanks to networktut and all on this site for comments )))) Good luck to anyone
Hi brothers,
I passed TSHOOT with 821 / 1000. 3 MCQ and 13 Tickets.
i had a BUG in this exam about vlan-filter. It is in DSW1 but you must choose ASW1. It is different experience. I can anwer your asks.
Good Luck !!!
@wolfman101,
Did you get a reply from the Cisco?
Passed this week, all questions here are relevant, understand the concepts well and you will pass. I got 3 MCQ and 13 TT’s. Thanks to NetworkTut and some useful comments from many others.
exam Ticket 1 to 13 questions options same like Pass4sure.
i mean that many option??
On another call
I passed yesterday and honestly if you can understand the Topology Cisco offers and you do the online demo you do not need any answers on this site. I passed with 945 and I encountered the bug where you have to choose ASW1 to get the Vlan Filer.
The Vlan Filter is clearly on DSW1 and I think I lost marks only because of those. Other than that it was pretty simple and interesting exam.
Time to Start CCIE.
Hi guys,
Just finished troubleshoot exam and now i am a CCNP! Good luck to everyone!
can we understand HSRP & IPV6 ticket from question itself?
is it mention there?
pleas kindly replay…
Hi
just finish T SHOOT 1000/1000 ……very easy exam ….thanks for network tut for presenting such a good websites ….and good luck for everyone.
Hi Frnds,
As I have completed my ccnp and have almost 4 years of exp in core networking…
I really like to help you guys regarding any R&S queations.
Pls refer me ur tension…bcoz its not ur only……ur questions are my tension now…
Lookin forward….
mail ur queries on blackbt497@yahoo.in
Regards,
Black fox
I passed TSHOOT yesterday with score 1000.
I have 3 MC questions – #2, 5 and 8
13 trouble tickets – same as on this site.
http://dajlajka.pl – demotywatory
zzz please are the questions from the trouble tickets normal direct question or full configurations or are they like hot spot….please reply….here is my email—-idreesee4real@yahoo.com
zzz reply me also
my email: karyogesh@yahoo.com
try this DEMO http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
is similar as on cisco exam
@zzz: plz explain one more thing that in demo we have one question and 4 tickets…
so in our exam we have a single question that having all 13 tickets or we have single question for every single ticket…plz explain ASAP…
http://dajlajka.pl –
wikary