Home > Ticket 16 – IPv6 RIPng OSPFv3 Redistribution

Ticket 16 – IPv6 RIPng OSPFv3 Redistribution

April 21st, 2018 Go to comments

Problem: Loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).

Configuration of R4:
ipv6 router ospf 6
 log-adjacency-changes
!
ipv6 router rip RIP_ZONE
 redistribute ospf 6 metric 2 include-connected
!

Answer:
Ans1) R4
Ans2) Ipv6 OSPF Routing
Ans3) Under ipv6 ospf process add the ‘redistribute rip RIP_Zone include-connected’ command

Comments (12) Comments
  1. Nickname (Please don’t use real name)
    January 8th, 2020

    @Tarzan, no – by default with IPv6 “connected” will not be advertised.

    explanation here: https://community.cisco.com/t5/networking-documents/understand-quot-include-connected-quot-keyword-use-in-ipv6/ta-p/3145213

  2. Mark
    January 10th, 2020

    did you get this in the exam?

  3. say_my_name
    January 20th, 2020

    got a question with exact problem description, seems like a new issue (not yet in networktut)

  4. bigdog
    February 4th, 2020

    @say_my_name, how did you solve it?

  5. speedy_g
    February 7th, 2020

    @abdullah : answer is :
    add vlan 10 to port-channel 13 – AND- no shut on F1/0/1

  6. Mr A
    February 10th, 2020

    anyone found any new question like @say_my_name mentioned?

  7. MelbourneBoy
    February 11th, 2020

    Hi All, I have passed Tshoot exam today with 1000/1000. Nov MCQs questions, simlets and tickets are all valid! NO new questions or tickets. To narrow down issue I normally ping 209.65.200.241 from R1, then R2>>>R3>>>R4>>>DSW1>>>Client & do ipconfig on client ping client IP 10.2.1.3 from DSW >>>R4 >>>R3 >>>R2>>>R1.

    I had premium account, after spending 4 hours I booked exam. CCNP route is theory, CCNP TSHOOT is practical and very easy.

  8. oh-4-f-sake
    February 11th, 2020

    ***I had premium account, after spending 4 hours I booked exam***
    I must be doing something wrong @MelbourneBoy

    What was your strategy?
    Mine MCQ – done
    Simlets – done
    going through tickets now one by one but that is going to take me more than 4 freaking hours :-)

  9. Ivo
    February 18th, 2020

    To work in Packet Trace do:

    – in DSW1 and DSW2:
    shutdown the vlan 1

    – in R4:
    ipv6 router ospf 6
    redistribute rip RIP_Zone
    redistribute connected

    R1#ping
    Protocol [ip]: ipv6
    Target IPv6 address: 2026::102:1
    Repeat count [5]:
    Datagram size [100]:
    Timeout in seconds [2]:
    Extended commands [n]: y
    Source address or interface: 2026::111:1
    Type of service [0]:
    Set DF bit in IP header? [no]:
    Validate reply data? [no]:
    Data pattern [0xABCD]:
    Loose, Strict, Record, Timestamp, Verbose[none]:
    Sweep range of sizes [n]:
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 2026::102:1, timeout is 2 seconds:
    Packet sent with a source address of 2026::111:1
    !!!!!
    Success rate is 100 percent (5/5), round-trip min/avg/max = 6/28/49 ms

  10. michel
    February 19th, 2020

    ohhh no i don’t pass to 300-135, 800/846 :-( so sad.
    please what are the next exame to finish the CCNP? 300-410? are this completely new material?
    I’m a little angry and disappointed.
    thanks for any possible Answer

  11. tonyy
    February 19th, 2020

    What happened @Michel?

  12. pissed
    February 21st, 2020

    failed tshoot today . not seeing the scroll bar for the different answers is what messed me up. i identified the issues just messed up answering them