Home > Ticket 16 – IPv6 RIPng OSPFv3 Redistribution

Ticket 16 – IPv6 RIPng OSPFv3 Redistribution

April 21st, 2018 in TSHOOT v2 Go to comments

Problem: Loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).

Configuration of R4:
ipv6 router ospf 6
 log-adjacency-changes
!
ipv6 router rip RIP_ZONE
 redistribute ospf 6 metric 2 include-connected
!

Answer:
Ans1) R4
Ans2) Ipv6 OSPF Routing
Ans3) Under ipv6 ospf process add the ‘redistribute rip RIP_Zone include-connected’ command

Comments (30) Comments
Comment pages
1 3 4 5 6 7 9 698
  1. George
    September 6th, 2016

    You can Download the (former, but “ipv6” ok working) PT 6.1 release from here:

    https://www.dropbox.com/sh/57vxusg67490or0/AACyShw1fmTE6Q4xSkvgbJvca?dl=0

    Pls choose a “Non Tutorial” PT 6.1 Package!

  2. CCNP-1000
    September 15th, 2016

    Only networktut
    I pass the exam today with score of 1000/1000 it took me 70 minute to finished it.

    I had the latest dumps all off them was garbage. I just study this website go for premium.
    I read all the comments and practice all the tickets on website and PT and gns3.

    To pass the exam with score of 1000 this website it’s enough but to survive out there you have to study hard, by hard i mean hard! Out there the person who knows one line more its the winner so passing this exam its jut the beginning of your study’s.

    Enough said this is how i did it : (i found this strategy on this website bye the ccnp-guy)
    ______________________________________________________________________

    You have to ask your self Is it ipv4 or ipv6?

    If IPv6 you have these 3 questions, 1 each on
    R2: (T12) IPv6: enable ospf 0
    R3: (T15) IPv6: remove “tunnel mode ipv6″
    R4: (T16) missing Redistribution from RIPng to OSPFv3

    If its IPv4 do the following to narrow it down:

    From Client 1 ping 10.1.1.1 if its :

    OK? = 3 tickets on R1:
    (T03) Wrong IP of BGP neighbour
    (T04) NAT – ACL mis-configured
    (T05) WAN ACL statement missing

    If you cant ping 10.1.1.1 try to ping 10.1.1.2 from client 1

    OK? = 1 ticket on R1:
    (T01) OSPF Authentication

    If you cant ping 10.1.1.2 try to ping 10.2.1.1 from client 1

    OK? = 2 tickets on R4:
    (T11) Redistribute ospf to eigrp (“to” & -> )
    (T14) EIGRP Passive Interface

    If you cant ping 10.2..1.1 you have 4 ticket as follow:

    NO? = 1 ticket on DSW1:
    (T06) VLAN filter

    or = 3 tickets on ASW1:

    (T08) Access port not in VLAN 10
    (T09) Port Channel not allowing VLAN 10,200
    (T07) Port Security

    I also had multiple choice questions and Eigrp and ospf simlets

    Good luck to you all.
    This is just the beginning so study hard.

  3. Dinesh
    September 20th, 2016
  4. Soon CCNP
    September 22nd, 2016

    Hi,
    for Ticket #7, what is the correct answer? “No switchport port-security” or “no switchport port-security and then shut, no shut”?
    Thanks

  5. cozzmo
    September 24th, 2016

    2026::111:1 isn’t listed on the topology map. Is there a topology map that has it so I can set up my lab accordingly?
    Thanks,
    Crzzy1 Cozzmo

  6. moamen
    September 27th, 2016

    pass yesterday “Alhamdo Lellah” with 1000/1000
    No new questions
    21 Q’s
    13 Tickets (As mentioned in this site except TT 2,10,13)
    2 Sim ( Switch Sim 4 Q’s as mentioned here & OSPF Sim 4 Q’s as mentioned here )
    6 MCQ’s exactly as mentioned here in this site.

    this TT was in my exam
    Note that ping from R1 to R3 failed , but from R4 to R1 succeeded, so don’t depend on ping results in this TT.
    you can depend on the running-config ” show run” & the routing tables where you will not see 2026::3:/122 network in R1, R2, R3 routing tables.

  7. Another method
    October 8th, 2016

    This is my TSHOOT IPV6 using show ip route method, let me know if it all seems good.

    ipv6 ospf 6 area 0 – R2
    R1 and R2 are not ospf6 neighbors with each other, after runing sh ipv6 ospf nei. R2 has no
    interfaces in area 0. As a result, R1 will have no OI routes for area 0 (2026::1) nor 2026::34 (area 34) that connects to area 0. But DSW will have routes for area 0 (2026::1) and 2026::34 (area 34), but not area 12 (2026::12)

    IPV6 Tunnel problem – R3
    R4 has no ospf6 neighbors because the tunnel mode on R3 is not compatible. As a result
    R3 will have no redistributed routes (OE2) from the DSW Ripzone (2026::3), (2026::102), and DSW will not have any routes to the OSPF6 network area 0 (2026::1), 2026::34 (area 34), or area 12 (2026::12)

    Redistribute Ripzone into OSPF -R4
    No missing ospf neighbors but R3 has no redistributed routes (OE2) from the DSW Ripzone (2026::3), (2026::102). DSW1 will however have routes to ALL OSPF6 area 0 (2026::1), 2026::34 (area 34) and area 12 (2026::12)

  8. Anonymous
    October 11th, 2016

    HOW CAN ONE GO PREMIUM IN OTHER TO PRACTICE THE REAL EXAM TOPOLOGY?

  9. Anonymous
    November 9th, 2016

    Hi @Taino,

    Could i have the topology.net for GNS?

  10. Meling
    November 11th, 2016

    I passed my 300-135 exam with the use of Grades4sure dumps. I got same questions in my exam that I prepared from Grades4sure test engine software. I recommend http://www.grades4sure.com/300-135-exam-questions.html to you if you want to clear your exam in first attempt.

  11. Abigail
    November 16th, 2016

    I recently passed the exam with 89%. http://www.testmayor.com/300-135-test.html dumps is valid and all my questions are from this. Need to notice that there is slight change of the answer orders, so be awarded. Read the book and then use these dumps as an aid. Good luck to you all.

  12. Xeno
    November 23rd, 2016

    Hay all !
    I passed T-shoot exam half hour ago ! With score 1000 .
    All questions from networktut and 68q dump still valid!.Don’t buy any premium dump
    From any site just networktut .

  13. Test
    November 25th, 2016

    Hey guys,

    Are we able to identify which IPv6 trouble ticket we get on the test by simply running “show run” on routers 2,3, and 4? For example, is the following running config for R4 unique to the RIP Zone trouble ticket (TT 16)? Configuration of R4:
    ipv6 router ospf 6
     log-adjacency-changes
    !
    ipv6 router rip RIP_ZONE
     redistribute ospf 6 metric 2 include-connected
    !

  14. DL
    December 6th, 2016

    @Test. Unless the Test questions were changed. If its IPv6 tickets, the question will explicitly state that from R1 [or other router], it failed to PING the IPv6 of another device [e.g. DSW1]

  15. christi
    December 13th, 2016

    Dumps4download provides the best of CCIE Routing and Switching 400-101 Exam Questions with 100% Money back Guarantee. Real exam simulation testing engine and PDF dumps.
    http://www.dumps4download.com/400-101-dumps.html

  16. elhombre2016
    December 17th, 2016

    If it is a “fail to ping loop” question it can only be 1 of 3 things, either R3 and R4 has a tunnel issue or R2 is missing IPv6 OSPFv3 or R4 is missing Rip_Zone under ipv6 ospf 6

  17. Ron
    January 23rd, 2017

    just passed my Tshoot exam 13 Tickets and 6 Multiple choice question. i did not had any Simplets.
    if you need any help give me a shout

  18. Raghav
    January 26th, 2017

    @Ron

    Networktut tickets still valid?

  19. Hay
    January 27th, 2017

    not valid cisco policy changed every exam

  20. Anonymous
    January 29th, 2017

    Hi Any 1 passed this exam after 28,2017………update thanks….waiting plz……

  21. CCIE Expert
    January 30th, 2017

    100% guaranteed passing material get Download package, (AllinONE) that you need to clear exam.
    13 Tickets in Packet Tracer
    68 Qs VCE Player and PDF

    http://rebrand.ly/ccnac5f48

  22. Henry
    January 30th, 2017

    Hi guys,

    For Ticket 16, pls confirm if client 1/2 will get 10.2.1.x ?

  23. Jatz
    February 5th, 2017

    ‘Hay’ — There’s no need to scare the other people. All the questions here are still valid.

  24. Cisco Monster
    February 6th, 2017

    Hello all!

    i took the exam a today
    i can say that exam is valid! especially for MCQ’s and BGP lab. i got 1000/1000

    Thanks Mob, CCNP-Guy, Konas, netwarrior33.

    see you on CCIE?

    Goodluck!

  25. Lou
    March 10th, 2017

    PASS with 951 but fail this question(RIPing IPV6), since the DAVID topology.pdf on main page FAQ and Tips is wrong. Ping R3 int 000.23 not responding…same for Tunnel. This made me doubt a lot because it point out to the IPV6 area 0 entry when you look over the Traceroute and ping process topology. I was pretty sur Rip_zone needed to be redistribute, but I still made a wrong choice. Anyway 951 means i would have gone 1000. I’M CCNP

  26. Malik
    March 16th, 2017

    anyone can tell me that in trouble tickets should we correct the problem ?

  27. Passe
    April 2nd, 2017

    Thank you so much for the materials. i got a perfect score of 1000, .

    Get Download here
    TSHOOT 300-135 = 68+6 new MCQs+13labs Q&As DUMPS

    http://bridgeurl.com/tshoot-dumps

  28. Lolo
    April 26th, 2017

    HI Guys :)
    Please send any dump
    nesquik730000 at hotmail fr
    Thanks

  29. mammad
    May 26th, 2017

    Hi everyone,
    Is there a new ticket on IPv6 with the issue on R1? If there is, could you please sure your answer with us and let us know what the correct answer is?

    Thanks

Comment pages
1 3 4 5 6 7 9 698