Share your ENARSI v1.1 Experience

@Anony, I hope you pass on the next one. Also, which Redistribution & PBR, and IPSec labs did you get 1 or 2? And were they the same as here?

HI, i failed my exam on abril 4th, There was a lab that is not here the other two yes. , my mistake was only studying the last questions that came out, the questions of all the years should be studied.

where can i get the dump of enarsi updated to the last version

@cdavid which labs did you get ?

Hi all,
passed ENARSI last saturday, I got 45 questions and 3 labs, almost all questions were from here.
About labs, 2 were from here (Redistribution and BGP), the 3rd had the same topology as the SNMP from here but with different task.
Anyway, the networktut training was definitely useful for me to pass the exam.
So I am now CCNP Enterprise certified.
Absolutely thanks @networktut because you saved my exam!!!

@markolino87 congrats!!! Which Redistribution lab did you get?

@tester2025
I got the version 1 Redistribution lab, with same tasks. Also the BGP lab was similar, almost the same.
I noticed that instead of the labs from here, in the exam some few parameters were preconfigured so I did not have to perform all the config sequence of the labs from here. But some others were missing, so I had to add it.
Otherwise, the SNMP lab was topologically the same but the tasks were completely different from here. I did not have a way to catch the tasks or I would have shared them here and I don’t exactly remember it because I got all the available time to get the exam (140 minutes cause of the 30min up for the different native language) and I finished when it was about 5 minutes left.
I got BGP and Redistribution lab consecutively after about 15-16 topics, and the SNMP lab before the last 2-3 questions so I arrived with a completely blind brain :D

@tester2025,
I had Redistribution & PBR 1. However, the questions/tasks I had were identical to the steps at the bottom of that page under “There is another version of this sim with the tasks below”

I also had IPSec 1 and was identical to what is posted on that page

@Anony thanks! Also,do you remember if they asked to specify the source of the ping below :

There is another version of this sim with the tasks below:

1. Ensure that R6 can ping the prefix 10.9.99.9.????? source of the ping on R6? Manipulate the first basic routing decision-making criteria of longest prefix match that if a router learns a route from different routing protocols, the longest matched prefix can be changed. Use decimal value of 75 if required to accomplish this. Do not use a route-map

@tester2025, I do not think I was asked to source the ping

@tester2025 & @Anony
In my Redistribution Lab the first task was to perform a ping from loopback source and ensure a specific traceroute path.

can someone share the ressources to study?
CBT nuggets video for example

I passed yesterday (after failing it 7 days ago, I swear it was literally my dogs fault). No surprises. 4/5 questions were not from here, the rest were identical. My labs were DMVPN 2, however there is a BIG caveat to this…i ONLY had to configure:
Configure mGRE neighborship to provide end-to-end reachability between Hub and Spokes
Configure NHRP authentication using password “C!$c0123”
NOTHING else!

Also had SNMP 2 and Redistribution & PBR Sim 2

second post to elaborate for above. On the DMVPN 2 lab, everything else was already there. tunnel mode, destination, source, map…everything. I ONLY had to configure authentication

@Anony,on your first try,PBR with the second version, when you did were you able to get this working without specifying the source of the ping?

Good to here on whats needed to configure. I was worried I would run out of time with need to configure so much in the Sims

@anony – Can you elaborate on your statement of 4/5 questions were not from here? Are you referring to Labs or something else?

@Anony @tester2025 and all who want to take the test.
I Failed today,
valid labs where SNMP Configuration SIM,
IPSec Configuration Sim and Redistribution & PBR Sim
(the version below called “There is another version of this sim with the tasks below:”)
Beginning with Task 1.
Ensure that R6 can ping the prefix 10.9.99.9 Manipulate the first basic routing decision-making criteria of longest prefix mach that if a router learns a route from different routing potocols, the longest matched prefix can be changed. …..an so on.
Good luck for everyone who is taking test in the next days.

Guys i plan to buy the premium before that i would like to how how many questions are there for me to train like Part 1 to part 8 are there around 800 questions?

Hi guys, exam passed yesterday. 3 Labs, IPSEC, RPF and Telnet and snmp. All questions are on this site. Thanks NetworkTUT!!!

@Anonymous – how many labs did you get and which one? THanks

Cleared the exam today.

all questions were from this site only.

had 3 labs;
SNMP Configuration Sim
Redistribution & PBR Sim [another version mentioned in the bottom]
DMVPN Configuration Sim 3

Thanks @networktut as usual & good luck for others preparing.

Sat for exam and failed today. Had 45 q and 3 sims

New SIM – for logging with sequence #, date and time. As well as log (send to syslog server) for any changes to ospf interfaces.

Had the DMVPN SIM and ACL SIM (need to modify ACL, exisitng entry deny any any). Got like 10 new questions I have not seen before.

Need to study some more till my next attempt. Good luck everyone.

Sorry – Same sim as SNMP here, my bad :)

@jopilo which DMVPN sim and ACL SIM did you get are these from here as well? Do you remember? I’m having a test on Monday. Thanks

@Riso – DMVPN SIM 3 and Telnet & Access-list Sim (Draft Version)

Good luck!!

Hello guys, passed the exam today, thanks @networktut, I am finally CCNP certified, I had these labs:

1. DMPVN -> you only had to add authentication and delete tunnel destination on the spokes
2. SNMP 1 -> same as here
3. Redistribution & PBR Sim 2 -> first task was to ensure that R5 Lo0 reaches R9 Lo0 (10.9.99.9) use distance 85, second task was using the metric values K1= 100000, K2=1, K3=255, K4=10, K5=1500 however you ere not suppose to change the default-metric and third task was the same as here
Regarding the questions, most of them were from here, however maybe around 10 new questions, don’t remember exactly.

@Risoo
Did you enter this command in SNMP1 lab?
R-WEST(config)#snmp-server host informs version 2c ospfMIB

@Risoo
how many question did you have in the exam ?
the question that you have the where from
New ENARSI Questions – Part 4 -5 ?
or from all the 8

Passed my exam yesterday. All 45 questions were from here. 3 labs: SNMP Sim, DMVPN 2 Sim, TELNET & Access-list Sim. Wish u all luck!

@Tanita
how you remember the labs ?
and how many drag and drop question did you have ?
from where was your question int the – New ENARSI Questions – Part 1 -8 ?