Share your ENARSI v1.1 Experience
The new ENARSI 300-410 v1.1 has come to replace the old ENARSI exam so we create the “Share your ENARSI v1.1 Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENARSI 300-410 v1.1 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note:
+ The ENARSI exam include lab sims, multiple choice and Drag drop questions.
+ You can use shortcut command (like “int”, “no sh”, “conf t”…), “tab” and “?” in the simulations of the exam.
+ To get the CCNP Enterprise certificate, you need to pass the ENCOR 350-401 exam (core exam) and one of the concentration exam (like this ENARSI exam).
Your posts are warmly welcome! Hope you will find useful information here!
Passed, maybe 5 questions I hadn’t seen before, some quite difficult and confusing. 4 labs including BGP, SNMP and draft SSH and ping one. It was difficult but making sure I could answer all the questions on here quickly gave me enough time to think about the others. Thanks networktut for another successful exam
Thank you for support!
I will have the exam next week
Passed the exam today.
My labs were:
1.Redistribution & PBR simulation (another version)
2.IPSec simulation 2
3.SNMP simulation 2
4.A new lab covering BGP simulation + route filtering (Task 1) + IP SLA (Task 2) + PBR (Task 3)
There were 46 multiple-choice questions.
The ENARSI Part 1–8 covered but
I found 6–8 new questions that were not included in Part 1–8.
Hi Guys, Can anyone please assure that the Dumps are updated with an emphasis on the Labs.
How Many Questions there is in the site? and how many Labs
How many questions are available in the sections 1-8?
Hi,i got the dums in the 22th of December does it still updated or is it old by now?
Can you share it?
Failed exam today.
Saw many questions from here. Labs were BGP, Redistribution&PBR, SNMP archive & lsa, and a new lab where you have 3-4 routers and need to set up AAA on two of them. The last one was probably the longest lab.
Pueden compartir su experiencia?
did anyone take the exam recently?
3 sim 40 MCQ
1 sim for configuring EIGRP within 2 VRFs
1 sim to configure Phase II DMVPN to allow spoke to spoke EIGRP peering
1 sim that is not on this site.
I do not think any of the sims I saw today were from this site.
@mike can you share sim info?
@mike can you share details on what was the Third Sim was about
Did anyone take the exam recently with any new updates ?
Pass today, 3 labs: VRF+EIGRP, DMVPN, DHCP+ACL+SNMP.
All questions in the site. Thanks Networktut
where do we find the DHCP ? I dont see it on Network tut
My CCNP ENCOR certification is set to expire in March. Do I need to retake the ENCOR exam to recertify, or will passing the ENARSI exam alone be sufficient to renew my ENCOR certification?
anyone has full solution for VRF+EIGRP lab?
where is this lab DHCP+ACL+SNMP. is it here in networktut?
3 Labs
VRF+EIGRP (Not the same as the draft version on this site – Establish EIGRP neighbor relationships AS500&AS600 for vrf Sales&Admin)
DMVPN (Not on this site but very similar to what’s already here)
DHCP+IP SLA+Netflow( Not here)
40 Questions
Questions are from here
I took the test last week. Got the DHCP+ACL lab that is not here on tut. Other 2 were EIGRP+VRF and CoPP. Passed, thanks networktut for prep.
Can you please share what the dhcp lab was about?
All the Labs NewB mentioned i have them.
Task 1 – DHCP Issue
R1 is configured as the DHCP server for the Branch network
DHCP settings:
Pool name: Branch-1
Network: 10.1.2.0/24
Default gateway: 10.1.2.254
Domain name: cisco.com
Problem: R6 does not receive a DHCP address
Action: Troubleshoot DHCP and fix the issue so R6 gets an IP
Task 2 – IP SLA & Route Tracking
R3 has two links to R4:
Primary: 192.168.1.0/30
Secondary: 192.168.4.0/30
Goal:
Use IP SLA + route tracking
Primary link should always be preferred
Secondary link should come up only if primary fails
❌ Load balancing is NOT desired
Problem: Current configuration is incorrect
Action: Troubleshoot and fix IP SLA + routing behavior
Task 3 – NetFlow Issue
NetFlow is configured on R3 interface Ethernet0/0
Purpose: Monitor ingress and egress traffic to ISP
Requirement:
Engineer wants to see Top 10 talkers
Problem: Top talkers cannot be seen
Action: Troubleshoot NetFlow configuration and fix it
┌──────────────┐
│ R2 │
│ NetFlow Coll │
│ e0/0 │
└──────┬───────┘
│ 10.1.1.0/24
│
┌──────────────┐ ┌───┴────────┐
│ R1 │ │ SW1 │
│ DHCP │─────│ Head Office│
│ e0/0 │ └───┬────┬───┘
└──────────────┘ │ │
│ │
┌──────┘ └──────┐
│ │
┌────▼────┐ ┌────▼────┐
│ R3 │ │ SW2 │
│ │ │ Branch │
│ e0/0 │ │ VLAN 20 │
│ │ │10.1.2.0 │
Primary Link │ e0/1 │ └────┬───┘
192.168.1.0/30 ────┼──────────┘ │
│ │
Secondary Link │ │
192.168.4.0/30 ────┼──────────┐ ┌────▼────┐
│ │ │ R6 │
│ │ │ DHCP CL │
┌────▼────┐ │ │ e0/0 │
│ R4 │─────┘ └─────────┘
│ ISP │
└────┬────┘
│ 192.168.10.0/24
┌────▼────┐
│ R5 │
│ ISP │
└─────────┘
DHCP–IP SLA — NETFLOW
What is the issue with netflow top-talkers? Do we have to configure it using “ip flow-top-talkers”? This is old approach thoiugh.
Im not 100% if the question was same, I got this from a chinese dumps, someone who took the exam recently can confirm.
Im planning on taking the exam next week.
Hello ABD, can you share the experience after the exam?
Good Luck.
Passed 2 days ago, 45 questions – majority of them from here, 3 labs: eigrp & 2 vrf, dmvpn and dhcp+sla+neflow. Only Dmvpn I managed to fully finalize it.
@Globe Earther
Can you confirm the DHCp, SLA, Netflow is the same as I shared earlier in comments