Share your ENARSI v1.1 Experience

@2908, thank for latest info, I hope you passed!

I did not pass this exam at all, spent way too much time on the broken DMVPN and could only finish 2 of the labs, maybe partial on the last. tasks were too different or hard to understand for me.

31 MCQ, most seem to be from here. 4 labs, concepts are similar but task are different for a couple of them.

VRF EIGRP is the same different VRF name and number, no ACL either, so this lab needs to be updated.

DHCP/IP SLA/ Netflow is a combo of the task sims here. But the ones here are broken, at least for me so I couldn’t practice at all on those.

DMVPN configs were started on exam and wanted phase 2 completed and dynamic tunnels between, but exam was either bugged out or I was missing something. The dynamic wouldn’t actually kick in so no direct spoke to spoke everything else seems to work.

Redistribution is the same here.

Eu passei no exame ontem.

Os labs que cairam foram

NHRP – A solução foi remover o destino dos tunneis, e no HUB adicionar o source loopback, e o modo gre multipoint em todos os routers.

IP SLA + DNS + DCHP – Criar o IP SLA apontando pro DNS e o DHCP no R6 receber o IP pelo segundo pool de endereço, com o comando “ip dhcp address extend interface”

Redistribuição route-map com os protocolos OSPF, EIGRP e RIP – Criar route-map, adicionando metricas do OSPF.

EIGRP + VRF – No LAB do meu exame o R5 que estava com o processo do EIGRP errado e não esqueça do configurar o R2 e R3 com o add-family ipv4 vrf “nome da vrf” autonomous-system “Numero do AS”

As questões foram 35.

Estudem para os LABS porque elas tem mais pontuação.

Vão na Fé em Deus e não na sorte!

Hi,
I can read many comments saying: MCQ are from here…I understand that we need a premium access to get them. Can someone tell us how many questions does the bank contain? It is to evaluate the time needed to work on them.
tks in advance

@maher, a lot, the sets is almost the same as ENCOR, got 8 sets in total, and lots simulator

thank you @manusia

Hi guys,
I passed my exam yesterday.
I got 4 labs + 35 MCQ with no drag and drop.
Labs:
– DMVPN: had to fix branches side: remove destination tunnel + add gre multipoint, set tcp adjust-mss, set tunnel profile, add all the crypto part (provided) and fix Eigrp routing
– VRF+Eigrp: create AF vrf and configure adjacencies
– Redistribution: ospf to eigrp, fix issue by removing distance for a specific route, complete PBR route map
– DHCP + netflow: fix issue in dhcp pool, configure relay…not difficult

I was very just in time, I spent 90 minutes with labs so I had to speed up for questions.
My advice: practice labs more than needed to be able to tshoot quickly. I think 50% of exam score is for the labs so focus on them.

Good luck

I passed it recently.
4 labs + 31 MCQ
Labs are easier in the actual exam
DMVPN – Configure Hub Tunnel. Branches are preconfigured.
VRF+EIGRP – same as here but have to fix one branch routers AS#
IP SLA+DHCP+Netflow – Same as here
Redistribution – Same as Redistribution & PBR Sim alternate task (see ones below)

Could you please tell me how many labs and test questions are in the dump from the site?

@John Congrats on passing. Do you mean at the alternate task that is at the bottom of Redistribution and PBR Sim number 1 or just one of the two main ones?

I passed the exam yesterday, but my time management was very bad. My experience was the same as @maher.. 90 min spent on labs, trying to get the verifications to work, which I couldn’t manage for two of the labs.. guess what I did was enough to scrape through.
LABS:
* DMVPN + OSPF [Had to configure Hub, branches were preconfigured, but there were some errors]
* VRF + EIGRP
* IP SLA + DHCP + Netflow2
* Redistribution + PBR
31 MCQ questions.. I recognised most of them from here. Some slightly changed, but if you understand the concepts explained here, you should be fine. Just manage your time better.

Thanks @Networktut for the invaluable support here

@StruggleENARSI
Yes, the alternate task that is at the bottom of Redistribution and PBR Sim number 1

@John thank you. Has anyone else gotten this version in the last few days?

I passed on 19th. it was a close call. i started my MCQ with 45 minutes let. spent lot of time in troubleshoot the last vrf lite lab. labs i got were
DHCP Relay, IP SLA/Tracking & Flexible NetFlow
DMVPN (mGRE/NHRP) & IPsec Tunnel Protection
Redistribution & Policy-Based Routing
VRF-Lite Multi-VRF EIGRP

if your lanugage is non native then you get 30 minutes extra so a total 120 minute.

I passed the exam yesterday.

I think if you want to fully appreciate and understand the labs, it really takes time to practice and familiarize yourself with the tasks. Time management is the most important

Labs:
DHCP, IP SLA & NetFlow Lab 2 – Tasks 1 and 2 were almost the same. Task 3 was a bit tricky, but the overall concept was still very similar.
DMVPN OSPF Simulation – The tasks were similar, but you need to configure the crypto on the HO. The configuration was relatively basic.
VRF & EIGRP Simulation – Tasks 1 and 2 were the same. There was no Task 3, and the given scenario was different.
Redistribution & PBR Simulation (Another Version) – The concept was the same, but with different given values/scenarios.

MCQ:
There were 31 questions. Around 2–3 questions were new, but the concepts and ideas were still similar to the MCQ list provided here.

Overall, understanding the concepts and practicing the labs is more important than simply memorizing the answers.

I passed the exam.

DHCP, IP SLA & NetFlow Lab 2.
It was an actually simplified version. DHCP server was configured, only the helper address was needed. Static default routes for sla were already configured (with track for the main one), only the track and the schedule was missing. I had also to setup the monitor into the interface in in end out direction.

VRF & EIGRP Simulation
Almost same as here. No acl configured on interfaces to block traffic. No authentication needed. Only R1 was configured with the wrong AS.

DMVPN
Was a bit different but not so complicated. It was needed to setup no ip split horizon for the eigrp tunnel int. No spoke to spoke needed (Phase 1).

Redistribution & PBR Simulation
Almost same as here. ACL for PBR already configured. I had just to change the route-map.

31 MCQ all from the pool.

Any update

Any update

@Anonymous
Were the labs the same as people mentioned?