Multiple Choice Questions

which one can be from infrastructure services in current questions? I got 0% in that section and have no clue which one it is,,,

I have passed today with full points. Everything was the same (12MCQ-Nov13, HSRP, BGP, 10 tickets) like in premium materials so really worth to buy the membership here. Be aware, IPv4 addresses are the same like here but IPv6 addresses end with :1.

FYI, when choosing area of a problem of tickets, e.g. “ACL/VLAN filter” then don’t panic that you cannot find it there. Just scroll down.

Thanks a lot, @nettut! And good luck everyone till the new version will come up.

Hi!
Can anybody send me actual dump with MCQ? suhofruct.michel -=at=- gmail . com
ThanX!

@Suhofruct just spend 22 dolars man!

Thank you Network Tut. Aced the exam. 12 MCQ – all from Nov, 10 Tickets all correct, 2 Sims (BGP, HSRP).
Watch for the NAT SIM, you can ping from everywhere, but the outside interface says NAT Inside – which was the problem.

Thank you Networktut. I passed today finally, all the MCQ from Nov, 13th, all 12 tickets from here.

@Suhofruct , test cost $300.00 and you don’t want to spend $22.00?

Thanks everyone for the feedback. I am taking the exams on Feb 7th. I will provide update after

As they all said, spend the $22 bucks it’s worth it. I also hope you’re not doxxing yourself dude. If that’s your real name in that email and Cisco sees it, they’ll ban you bro.

Hi!
I’ve just passed exam today with 1000/1000.
I’m so happy !!!
Only new questions (13th-Nov-2019), 2 Simlets, the same Tickets.
All answers here are good.

ONE PROBLEM – almost failed here – in Ticket 15 IPv6 GRE Tunnel command “tunnel mode ipv6” is in the middle of interface configuration, not at the bottom.

@Passed_full
To confirm did you only got the most recent questions from 13th Nov release and the BGP and HRSP sims?
did you get all 15 Tickets too? minus the two that were removed ticket 2 & 10?

@PeterMark, I can’t speak for Passed_Full, but I also passed yesterday with 1000/1000 and only saw the latest Nov MCQs and neither Ticket 2 nor 10 were on mine. But don’t take chances, study those two tickets as well just in case because some have said they have popped back up occasionally.

Passed it today with full score, only question from 13th of november. same tickets, ip @, etc.

22$ is nothing for that

Failed TSHOOT today. Will I get a completed different set of questions nextweek?

Just passed with 1000/1000

Absolutley everything here is valid. This site is all you need to pass – get a Premium Membership! $15 for 15 days is nothing! Do the exam before it changes on the 23rd.

I passed 05.02.2020. 923/1000 All MCQ, LABS, Simlabs are valid.

I passed 05.02.2020. 923/1000 All MCQ, LABS, Simlabs are valid on this page.

plz share membership if active . i going to give exam 2maro , my membership is expire . plz any one ,,,,,,,,,,,,,,,,,,,,,,,,,,, help me on ,,,,,,,,,,,,,,,,,,,,,,heerooshrma0143 at gmail dot com

I Passed yesterday with minimum request 846 point, the Primum memebership is 100% worth it .

i had mixed up in the ticket and HSRP SIM, but i was lucky to pass

I failed the T-shoot yesterday, totally gutted as I used the site and have been getting all the questions correct.

Thinking back when I was doing the tickets, I did not notice weither the tickets was asking for an IP4 or IP6 question, and I got tottally confused yesterday.

For those of you that has taken exam recently can you advise where the ticket info is?

I failed by 60 points … sigh…

@ carbon_reply – If the exam is tomorrow, just pay the $15 dude

@ zink – on the main page of the premium membership is shows where to click to see whether the ticket is IPv4 vs. IPv6. Basically, at the bottom of the window, scenario will not help you, you need to click “ticket” which will provide an IPv4 or IPv6 address in the description. Whichever type you see, that is the ticket type.

@ zink – you should always devote some few minutes to read and not just rush to answer the questions. Every ticket has a question section and for
ipv4- they say client 1 cant ping the web server 209.65.200.241 (this is obviously an ipv4 address)
ipv6 – they say they say one of the routers or l3 switches with ipv6 configured can’t ping one of the other ipv6 loopbacks.
So please do well to read

ClearExam , everything from networktut only
(1) BGP , HSRP , All MCQ
(2) Ipv6 : ipv6 Tunnel , Area 0
(3) Ipv4: VLAN filter,
OSPF Authentication,
NAT Inside,
DHCP Helper-address,
EIGRP Passive Interface
Switchport trunk,BGP Neighbor ,
Redistribution Route-map(ospf_eigrp)

I recommend to follow NULLZERO strategy step wise , you will clear Exam .
further any help drop email i will try to help
Thnx NetworkTut and also who mention comments here

I passed the Tshoot exam last Friday the 7th with 1000. Everything that come out in the exam is on this site. The statements for the MCQs (13th of Nov) are not exactly as in the simulations but if you memorize the answers you should be ok. Tickets and simlets exactly the same as in the simulations. Thanks Networktut for this material and good luck to everyone.

@host….i failed the exam and i am a premium member. The issue i was having was the ticket was not saying what was the issue on the topology to even know where to start troubleshooting from.
Can someone assist me with how to know exactly what the issue is on a ticket….it was so confusing

@dyanam
Maybe you missed pressing the button to display the question for the Trouble Ticket? The topology diagram is for you to reference. The issue being reported is described in each TT

pass to day with 1000
every think is valid

Hi everyone, Can someone help me
Refer to exhibit. Which output will be displayed for section 2 when the command no debug condition 1 is entered on router R1?
B. R1#show debug condition1
Condition 2: interface gi0/2 (1 flag triggered)
flag: gi0/2
C. R1#show debug condition1
Condition 1: interface gi0/2 (1 flag triggered)
flag: gi0/2
D. R1#show debug condition1
Condition 2: username admin (2 flag triggered)

What is the status of MCQ’s, seems so far in February they are from the November 2019 set yes?

@ESKAE I clicked on the ticket but question s where either you can not ping client 1 or an ipv6 address is shared and you can not reach the web server. the issue i had is knowing where to search for the question. Please assist i want to retake it 15th february